Client-Kanpur Fertilizers & Cement Limited, Kanpur, INDIA
Project-Study of CO2 removal section piping system of Ammonia plant for vibration problem, size and thickness adequacy, flow pattern and stress analysis.
Client-Bliss Anand Pvt Ltd, Manesar, Gurugram, INDIA
Project-Design of 2 No. three-phase gas-oil-water separators handling a gas flow of 12.5 MMSCFD and 10.0 MMSCFD respectively, oil flow of 5000 BPD and water flow of 5000 BPD, operating at a pressure of 150 Bar (g) and 100 Bar (g) respectively.
Client-Hyper Filteration Pvt Ltd, Sahibabad, INDIA
Project-Basic Engineering for Design of vacuum operated Multiple Effect Evaporation System of Thermo Vapor Recompression (TVR) type to evaporate 17 m3/hr feed from initial concentration of 40000 ppm to final concentration of 350000 ppm.
Client-Isgec Heavy Engineering Limited, NOIDA
Project-Front end engineering design (FEED) and conceptual design for 50 m3 aqueous ammonia storage system with vapor absorption system and sprinkler cooling system.
Client-Agile Process Chemicals LLP, Navi Numbai, INDIA
Project-Modification of pyrolysis gas condensation system for 12 MTPD pyrolysis plant involving design of new heat exchangers (condensers), separators, expansion vessel, pumps, blower, associated piping, process control and instrumentation system.
Client-Agile Process Chemicals LLP, Navi Numbai, INDIA
Project-Engineering design of steam generation and pipe heat tracing system including waste heat boiler, steam drum, de-aerator, boiler feed water pump and chemical dosing system for 6 MTPD pyrolysis plant.
Client-Agile Process Chemicals LLP, Navi Numbai, INDIA
Project-Process optimization study for 6 MTPD pyrolysis plant for energy and cost optimization including design of combustion system, air pre-heater, combustion air blower, piping system, ID fan, knock-out drum, etc.
Client-Pyrocrat Systems LLP, Mumbai, INDIA
Project-Pre-feasibility/cost-estimation study for setting up 10000 liters/day pyrolysis oil fractionation pilot plant for . The plant fractionates pyrolysis oil into value added products such as naphtha, diesel and base oil.
Client-Isgec Heavy Engineering Ltd, NOIDA, INDIA
Project-Engineering support including thermal design of shell-and-tube heat exchanger for Durrah Sugar Refinery project located at Yanbu, Kingdom of Saudi Arabia.